"Solar-plates" Photopolymer plates


Toyobo KM95R
photopolymer 0,95 mm
steel backing


Toyobo KM152R
photopolymer 1,52 mm
steel backing


Toyobo KF95M photopolymer 0,95 mm.Transparent plastic backing

These photopolymer plates are used in the commercial printing industrie for "flexographie" (printing with a "flexible" forme on rough surfaces). Printmaking artists like Dan Welden, have introduced it into the printmaking community in the 1970's.
In the commercial industry photopolymer plates are only used for relief printing. In printmaking however it can be used both for relief as well as intaglio. Solarplates can be used as an alternative for laminating copper plates with, for example, films like ImagOn. Some people find laminating plates not an easy job. Solarplates are already "laminated" on a metal or plastic backing. On top of the polymer layer there is a a protective mylar sheet.

Flexography:
Flexography is a printing process using a flexible forme. Actually a modern form of typography which can be used on almost all materials, like plastic, thin metal, cellofane, cardboard. It is mainly used for printing on non-porous materials as used in the food packaging industry. It is also used for printing "full surface" colours.

Links:

  • User's instructions for Toyobo Printight photopolymer plates
  • Introduction in working with solar plates.
  • Solar plate photopolymer printing.
  • Safety sheet Printight.
  • Video's about photopolymer plates

!

Toyobo photopolymer plate 0,95mm 15x21cm (6"x8.3") Printight A5, KM95R, metal backing

Toyobo
022011
重 量: ..

KM95R, This plate is the most popular. Steel backing.
Thickness pf photopolymer 0,95 mm
Quantity discount applies.

Important:
Polymetaal cuts these A5 plates on a sheet metal shear by cutting A4 size through the middle. Due to the combination of soft polymer on a hard steel backing, the edge of the cutted plate is slightly rounded. This can not be avoided. If this can be an objection to you, it is better to take A4 format. We can not accept A5 plates with rounded edges being returned to us.

Toyobo photopolymer plate 0,95mm 21x29,7cm Printight A4 KM95R, metal backing

Toyobo
022012
重 量: ..

KM95R is de meest verkochte plaat, stalen drager, fotopolymeer 0,95 mm dik. Kwantumkorting van toepassing

Toyobo photopolymer plate 0,95mm 29,7x42cm Printight A3 KM95R, metal backing

Toyobo
022017
重 量: ..

KM95R is de meest verkochte plaat, stalen drager, fotopolymeer 0,95 mm dik. Kwantumkorting van toepassing

Toyobo photopolymer plate 0,95mm 42x59,4cm Printight A2 KM95R, metal backing

Toyobo
022022
重 量: ..

KM95R is de meest verkochte plaat, stalen drager, fotopolymeer 0,95 mm dik. Kwantumkorting van toepassing

Toyobo photopolymer plate 0,95mm 59,4x84cm Printight A1 KM95R, metal backing

Toyobo
If not in stock, delivery time up to 3 months
022024
重 量: ..

KM95R is de meest verkochte plaat, stalen drager, fotopolymeer 0,95 mm dik. Kwantumkorting van toepassing

Toyobo Printight A0 (84x118,8 cm) KM95R

art. nr.
022025
重 量: ..

Prijs op aanvraag
KM95R is de meest verkochte plaat, stalen drager, fotopolymeer 0,95 mm dik. Kwantumkorting van toepassing
Dit formaat wordt niet op voorraad gehouden en is moeilijk leverbaar. Indien gewenst neem hierover kontakt met ons op.

Toyobo photopolymer plate 1,52mm 15x21cm Printight A5 KM152R, metal backing

Toyobo
022016
重 量: ..

KM152R, because of the thicker photopolymer layer very suitable for relief printing, typography etc. Steel backing. Thickness of polymer layer 1,52 mm.
Quantity discount applies.

Important:
Polymetaal cuts these A5 plates on a sheet metal shear by cutting A4 size through the middle. Due to the combination of soft polymer on a hard steel backing, the edge of the cutted plate is slightly rounded. This can not be avoided. If this can be an objection to you, it is better to take A4 format. We can not accept A5 plates with rounded edges being returned to us.

Toyobo photopolymer plate 1,52mm 21x29,7cm Printight A4 KM152R, metal backing

Toyobo
022014
重 量: ..

KM152R, vanwege de dikkere fotopolymeerlaag zeer geschikt voor hoogdruk met veel relief, zoals stempels, boekdruk, typografie e.d. Stalen drager, fotopolymeer
1,52 mm dik. Kwantumkorting van toepassing

Toyobo Printight A3 (29,7x42 cm) KM152R

art. nr.

Op aanvraag leverbaar
KM152R, vanwege de dikkere fotopolymeerlaag zeer geschikt voor hoogdruk met veel relief, zoals stempels, boekdruk, typografie e.d. Stalen drager, fotopolymeer
1,52 mm dik. Kwantumkorting van toepassing

Toyobo Printight A2 (42x59,4 cm) KM152R

art. nr.

Op aanvraag leverbaar
KM152R, vanwege de dikkere fotopolymeerlaag zeer geschikt voor hoogdruk met veel relief, zoals stempels, boekdruk, typografie e.d. Stalen drager, fotopolymeer
1,52 mm dik. Kwantumkorting van toepassing

Toyobo Printight A1 (59,4x84 cm) KM152R

art. nr.

Op aanvraag leverbaar
KM152R, vanwege de dikkere fotopolymeerlaag zeer geschikt voor hoogdruk met veel relief, zoals stempels, boekdruk, typografie e.d. Stalen drager, fotopolymeer
1,52 mm dik. Kwantumkorting van toepassing

Toyobo Printight A0 (84x118,8 cm) KM152R

art. nr.

Op aanvraag leverbaar, maar lange levertijd is mogelijk
KM152R, vanwege de dikkere fotopolymeerlaag zeer geschikt voor hoogdruk met veel relief, zoals stempels, boekdruk, typografie e.d. Stalen drager, fotopolymeer
1,52 mm dik. Kwantumkorting van toepassing

Toyobo photopolymer plate 0,95mm 15x21cm Printight A4 KF95M, plastic backing

Toyobo
022009
重 量: ..

KF95M, Transparante kunststof drager, fotopolymeer
0,95 mm dik. Kwantumkorting van toepassing

Toyobo photopolymer plate 0,95mm 21x29,7cm Printight A4 KF95M, plastic backing

Toyobo
022013
重 量: ..

KF95M, Transparante kunststof drager, fotopolymeer
0,95 mm dik. Kwantumkorting van toepassing

Toyobo Printight A3 (29,7x42 cm) KF95M

art. nr.

Op aanvraag leverbaar
KF95M, Transparante kunststof drager, fotopolymeer
0,95 mm dik. Kwantumkorting van toepassing