CHARBONNEL soft correction ground, white ball.
Available till end of stock
After leaving the plate in acid for the required time, remove the plate from the acid bath solution and remove the ground using the appropriate thinner: The amount of time you leave the plate in the acid depends on the acid's strength (measured using an acetometer), the room temperature and the depth you wish to give the stroke. The etching is then ready and on!y the finishing touches need be applied. A retouching ground can be applied to the plate which may then be retouched as required following the lines of the previous etching.
It is applied hot, using a cloth ball or painting dabber.
Dimensions: diam. 4 cm, height, 3 cm. weight 20 gram. 1.6x1.2" weight 0.04 lb
- Pitch resin, beeswax, tallow
- Dry extract: 100%
- Hardness: flexible
- Finish: transparent
- Consistency: paste