Made on a cylinder mould (traditional process): quality close to that of paper made by craft methods. The slow turning of the cylinder enables the fibres to be deposited evenly and spread in all directions over the wire. In contrast with a Fourdrinier paper machine where the fibres are orientated mainly in one direction. The paper made on a cylinder mould is therefore more homogeneous and has good dimensional stability.
When printing, the job of positioning the humidified paper is much easier and the paper can easily withstand repeated passages through the press.
Only papermaking on a cylinder mould can produce paper with deckle edges.

Properties:

• With alkaline reserve, acid-free, no optical brightening agents
• 100% cotton: Paper with very good mechanical strength. Pleasure of using a soft, supple, noble material
• Lightly sized: smooth, absorbent surface suitable for all printmaking techniques
• Texture: Light fine grain: perfectly balanced soft grain and smooth surface that brings out the slightest detail. Allows the artist to obtain shadow and light effects, to create contrasts.
• 280 gram (weight per m2)
• white
• 4 deckle-edges
• watermark

Applications

• Pencil
• pastel
• charcoal
• sanguine crayon
• graphite
• felt pen
• lithography
• intaglio (engraving, etching)
• relief printing
• linocut
• letterpress
• screen-printing
• hot-foil stamping
• bookbinding
• heat embossing
• collotype printing

If this parcel is transported by a parcel company like or , is has to be protected between two sheets of hardboard.