|
Bed size |
111 x 200 cm |
44" x 79" |
Diameter top roller |
30 cm |
12" |
|
Bed thickness |
2 cm |
0.8" |
Wall thickness of the steel rollers |
3,2 cm |
1.3" |
|
Press dimensions: |
|
Diameter bottom roller |
32 cm |
12.6" |
|
- Length of the side frames |
190 cm |
75" |
Work height of the press |
88 cm |
35" |
|
- Width including handwheel |
160 cm |
63" |
Thickness of the steel side frames |
5 cm |
2" |
|
- Height |
160 cm |
63" |
Maximum opening between bed and top roller |
10 cm |
4" |
|
Length of rollers |
100 cm |
39.4" |
Thread pitch of the pressure spindles (metric) |
M 30 |
|
Press weight |
1300 kg |
2860 lbs |
Diameter of the hand wheel |
92 cm |
36" |
|
Diameter shafts in bearing blocks |
8 cm |
3.2" |
|
|
|
|
Minimum clearance required when transporting the press, with the gearbox, handwheel and electrical control box removed |
146 cm
|
|
Voltage required for the system (is being converted by frequency converter into 3-fase power with variable frequency) |
230 Volt. AC monophase |
120 volt AC monophase as option |
|
Variable printing spreed |
1-6 cm/sec |
0.4-2.4"/sec |
Power electric motor |
1000 Watt |
210 x 160 x 180 cm. The press is transported in a crate by road within Europe or by sea freight outside Europe. |
Wooden crate. Door to door via road freight inside Europe. Via sea freight, outside Europe, until port of destination, CFR. Excluding fumigation (if required)
|
|
Weight of the crate |
1450 kg |
3190 lbs |
|
|
