Plate Oil is a commonly used ink modifier by heating linseed oil for specific periods of time to create various viscosities. It is available in consistencies ranging from the thin bodied #0000 varnish upwards to heavier bodied #7 varnish. Litho varnish may be used to increase the body of an ink when using a stiffer varnish or to soften an ink when using thinner bodied varnishes..
Weight 0,55 kg. Dimensions: 10x5x16 cm
Plate Oil is a commonly used ink modifier by heating linseed oil for specific periods of time to create various viscosities. It is available in consistencies ranging from the thin bodied #0000 varnish upwards to heavier bodied #7 varnish. Litho varnish may be used to increase the body of an ink when using a stiffer varnish or to soften an ink when using thinner bodied varnishes.
Weight 0,55 kg. Diameter 9 cm, Height 10 cm
Weight 0,55 kg. Diameter 9 cm, Hauteur 10 cm
Flash Oil is used to diminish the tack of etching inks. It is a clear liquid, not yellowing. It takes just a few drops to diminish tack. Printmakers who make viscosity prints prefer often flash oil compared with linseed oil. Contrary to many other additives this oil dries through evaporation, which reduces the risk of paper damage.
Ink with Flash oil added to it will return slowly to the original properties because the oil evaporates.Can be used for all oil based inks.Weight 0.55 kg. Dimensions 10 x 16 x 5 cm
Setswell is a versatile additive that slows drying somewhat helping to keep ink layers open and able to accept and trap subsequent inks being printed. Setswell is also commonly used to reduce the tack and the body of an ink. Add as needed to any ink to meet your needs. Use this product if these inks are too stiff for automatic presses.
Weight 1.3 lbs , 600 gramsDimensions 4 x 4 x 4" , 10 x 10 x 10 cmContent: 1 Pint, 0,5 litreThis product can be used for all oil-based inks; litho-inks, etching-inks, block-print-inks, etc.
Clearset compound is a soft gel additive used to reduce the tack of an ink while trying to mmaintain the body of an ink. Add as needed to achieve the required consistency.
Litho Varnish / Plate Oil is a commonly used ink modifier by heating linseed oil for specific periods of time to create various viscosities. It is available in consistencies ranging from the thin bodied #0000 varnish upwards to heavier bodied #7 varnish. Litho varnish may be used to increase the body of an ink when using a stiffer varnish or to soften an ink when using thinner bodied varnishes.
This is the varnish # 3.
Litho Varnish is a commonly used ink modifier by heating linseed oil for specific periods of time to create various viscosities. It is available in consistencies ranging from the thin bodied #0000 varnish upwards to heavier bodied #7 varnish. Litho varnish may be used to increase the body of an ink when using a stiffer varnish or to soften an ink when using thinner bodied varnishes.
This is the varnish # 5.
Weight: 0,5 kg. (1 lb) Dimensions: Diameter 9 cm (3.5"), Height 10 cm (4")
A light powder that gives body to lithographic inks and etching inks. The ink becomes stiffer. Many lithographers use this material in the humidifying water (for stone or slab). The stone or plate therefore remains cleaner. Use a dust mask.
Weight 1,1 kg.(2.5 lbs) Diameter 22 cm.(9") height 20 cm (8")
Spray a thin layer over the ink in the jar. This will seal the ink from the air and prevent it from drying out further.
Height 20 cm
Diameter 7 cm