Charbonnel conditioners (additives) for oil based etching inks
Afmetingen
10x6x4 cm
Gewicht
0,15 kg
Inhoud
75 ml
Olie voor het verdunnen van Charbonnel etsinkten. (plaatolie)
Dimensions can
10x16x4,5 cm
4x6.3x1.8"
Weight
0,55 kg
1.2 lbs
Content
500 ml
Oil to dilute Charbonnel etching inks.
10x16x4 cm
4x6.3x1.6"
0,6 kg
1.3 lbs
This oil is used to change a color's tonal value (intensity). Thickness 30 poises. This is about viscosity (the higher the number the thicker the liquid). This oil is the binder for most Charbonnel color inks
12x20x 6cm
4.7x7.8x2.4"
1,2 kg
2.6 lbs
1 liter
1 litre
This oil is used to change a color's tonal value (intensity). Thickness 220 poises. This is about viscosity (the higher the number the thicker the liquid). This oil is the binder for many black Charbonnel inks
The Cranfield Wiping Compound & Tack reducer is a multi purpose additive that can be used for all Cranfield oil based inks, including the Caligo range of inks. It will reduce the tack of the ink but maintain the other characteristics of the ink. It also makes wiping easier. It makes ink transfer easier, even when printing without a press and on difficult paper. It contains some mineral oil and therefore add a maximum of 3% (by volume). PAY ATTENTION. This product can also be used as an alternative to Graphic Chemical's Easy Wipe. It is suitable for all oil-based etching inks.
Safety Sheet
A light powder that gives body to lithographic inks and etching inks. The ink becomes stiffer. Many lithographers use this material in the humidifying water (for stone or slab). The stone or plate therefore remains cleaner. Use a dust mask.
Weight 1,1 kg.(2.5 lbs) Diameter 22 cm.(9") height 20 cm (8")
Spray a thin layer over the ink in the jar. This will seal the ink from the air and prevent it from drying out further.
Height 20 cm
Diameter 7 cm
Charbonnel conditioners (additives) for oil based etching inks
