Zinc plates titanium 1,6 mm thick, a semi-transparent protective film on both sides
These plates are carefully checked before they are covered with a semi transparent blue coating on both sides. The purpose of this coating is to protect the fragile surface during handling. One side may not be covered with white foil! However, we cannot guarantee a 100% scratch free surface. This is "normal" quality zinc. To improve the quality tiny amounts of titanium and copper have been added.
The tolerance of the cutted plates dimensions is +/- 1 mm
Quantity discount applies
Detail of unpolished zinc
Link:
Video's about etching, using tools, grinding tools, dry point, etc.
Transport: If these plates are sent as a parcel, they need to be protected between ply wood. Therefore, choose from the column on the right an appropriate packaging. Mind the maximum parcel weight (sometimes 30 or 20 kgs.) Are the plates too big, or the parcels too heavy, then the plates should be packed on a pallet (roadfreight) or in a crate (seafreight). Then, choose from the column on the right an appropriate pallet or crate. Of course, plates can be combined with other "flat objects" like packs of paper.
Transport,
packing
If you want the plates to be sent to you, you should
choose from the three options here below. Only then the system calculates the estimated
shipping- and packing costs.
As a
parcel
If the
plates are to be sent via DPD
or Post.nl,
it is
required to protect it between two plywood plates.
Klick on the link "Add
plywood packing"
and add next the appropriate size to your basket.
Road
freight within
Europe
If the
plates are to be sent on a pallet,
(road freight), klick on "Add
pallet"
and add next an appropriate pallet size to your basket.
Maximum 1 pallet!
You cann add other products on your pallet.
Sea
freight outside
Europe
If the
plates are to be sent in a crate (sea freight), click on
"Add
crate"
änd add next an appropriate crate size to your
basket.
Maximum 1 crate.
You can also add other products in your crate.